A cricket points table looks simple until two teams finish level and both captains claim second place. This guide shows you how to build one for a local league: what each result is worth, how to work out net run rate properly, and which tie-breakers to agree before the tournament starts. A worked four-team league runs through every step.
Quick Answer
Give every team points for each result, for example 2 for a win, 1 for a tie or washout and 0 for a loss, and rank the teams by points. When teams finish level on points, use tie-breakers you announced in advance, usually wins, head-to-head result and then net run rate (NRR). NRR is the team’s runs per over scored minus its runs per over conceded, and a side bowled out early is counted as having used its full overs.
The Columns Every Points Table Needs
A table that can survive an argument records more than points. Keep these columns for every team:
| Column | What it records |
|---|---|
| P | Matches played |
| W / L / T / NR | Wins, losses, ties, no results (washouts) |
| Pts | Points from the scale you announced |
| Runs for / Overs faced | Running totals, kept as balls if you can |
| Runs against / Overs bowled | Running totals, same again |
| NRR | Worked out from the four totals above |
Keep the runs and overs totals even when nobody is level on points yet. If you only work out NRR on the last day, you’ll be hunting for old scoresheets while two captains argue.
There’s no single official scale for a local tournament. The ICC’s ODI playing conditions (Clause 16.10.1) set out one model: 4 points for a win, 5 for a win with a bonus point, 2 for a tie or no result, and 0 for a loss. Bilateral T20Is don’t use a points system at all (ICC T20I Clause 16.10). For a club or corporate league, the 2-1-0 scale used in this guide keeps the same idea, with a tie or washout worth half a win, and it’s easy to add up. At the ICC Men’s T20 World Cup in February 2026, Pakistan and New Zealand shared a point each when their Super Eight match in Colombo was washed out.
Formula
Net Run Rate = (Total runs scored ÷ Total overs faced) − (Total runs conceded ÷ Total overs bowled)
Three rules decide what goes into those totals. The first two come from the ICC’s ODI Clause 16.10.2, and all three work well for local cricket:
- All out = full overs. If a side is bowled out before its overs are up, its NRR is based on the full quota it was entitled to. Use the same full quota for the bowling side’s overs bowled, as Criko’s NRR calculator does, so both teams’ figures describe the same 20 overs.
- No result, no NRR. Only matches that produce a result count. A washout gives points but adds nothing to runs or overs.
- Overs are balls, not decimals. 16.4 overs is 16 overs and 4 balls, which is 100 balls, or 16.67 overs. It is not 16.4.
Step-by-Step Calculation
Here’s a hypothetical four-team, 20-overs-a-side league in which every team plays the others once.
| Match | Batting first | Chasing | Result |
|---|---|---|---|
| 1 | Lions 168/5 (20) | Tigers 152/8 (20) | Lions won |
| 2 | Eagles 141 all out (18.3) | Sharks 142/4 (17.2) | Sharks won |
| 3 | Lions 133/9 (20) | Eagles 137/3 (16.4) | Eagles won |
| 4 | Tigers 176/4 (20) | Sharks 159/7 (20) | Tigers won |
| 5 | Lions 150/6 (20) | Sharks 121 all out (19.1) | Lions won |
| 6 | Tigers 145/7 (20) | Eagles 146/5 (19.4) | Eagles won |
Step 1: Award the points
Lions and Eagles have 2 wins each, so 4 points each. Tigers and Sharks have 1 win each, so 2 points each. Points alone can’t separate either pair.
Step 2: Work out each team’s net run rate
Take Lions.
- Runs scored: 168 + 133 + 150 = 451, from 3 full innings of 20 overs, so 60 overs (360 balls).
- Runs conceded: 152 + 137 + 121 = 410.
- Overs bowled: 20 overs against Tigers, plus 16.4 against Eagles (100 balls), plus 20 against Sharks. Sharks were all out in 19.1 overs, but that innings counts as the full 20. That’s 120 + 100 + 120 = 340 balls, or 56.67 overs.
- Rate for: 451 ÷ 60 = 7.517 runs per over.
- Rate against: 410 ÷ 56.67 = 7.235 runs per over.
- NRR: 7.517 − 7.235 = +0.281.
Do the same for the other three. Watch the all-out innings and the chases that finished early: Eagles’ 141 all out in 18.3 overs (111 balls) counts as 20 overs, Sharks’ winning chase in 17.2 overs is 104 balls, and Eagles’ chase in 19.4 overs is 118 balls.
| Team | Pts | Runs for / overs | Runs against / overs | NRR |
|---|---|---|---|---|
| Eagles | 4 | 424 / 56.33 | 420 / 57.33 | +0.201 |
| Lions | 4 | 451 / 60 | 410 / 56.67 | +0.281 |
| Tigers | 2 | 473 / 60 | 473 / 59.67 | -0.044 |
| Sharks | 2 | 422 / 57.33 | 467 / 60 | -0.423 |
Step 3: Rank the table
The table above is in the final order, and Eagles are top even though Lions have the better NRR. That’s because this league follows the order in the ICC’s ODI Clause 16.10.1: most wins first, then the result between the tied teams, then NRR. (The ICC clause also has a bonus-point step before NRR. This league doesn’t award bonus points, so that step is left out.) Lions and Eagles both have 2 wins, and Eagles beat Lions in Match 3, so Eagles go first. Tigers beat Sharks in Match 4, so Tigers are third.
If the league had announced “points, then NRR” instead, Lions would be top. Neither order is wrong. The mistake is choosing one after the results are in.
Important Points
- Head-to-head only works for two teams. If three teams are level and each beat one of the others, head-to-head settles nothing. Have NRR, or another named step, as the next tie-breaker.
- NRR uses totals, not an average of match NRRs. Add all the runs and all the balls first, then divide. Averaging each match’s figure gives a different, wrong answer.
- An early chase helps the bowling side’s NRR too. Lions are credited with bowling only 16.4 overs against Eagles, which raises their runs-against rate. That’s correct: Eagles scored quickly.
- Real tournaments are decided this way. At the T20 World Cup, as of 28 February 2026, New Zealand (NRR +1.390) went through to the semi-finals ahead of Pakistan (NRR -0.123), with both teams on 3 points (ICC). The washout gave each of them one of those points.
Another Example: The All-Out Mistake
The most common scorer’s error is recording the overs an all-out side actually batted. In Match 5, Sharks were all out for 121 in 19.1 overs, which is 115 balls.
If the Lions’ scorer enters 19.1 overs bowled instead of 20, Lions’ NRR drops from +0.281 to +0.173. That’s because their runs against are now spread over fewer overs. A gap of about 0.11 is easily enough to swap two teams on the table. Bowling a side out is the best result a fielding team can get, and the full-quota rule makes sure it doesn’t count against them.
Rules to Write Down Before the First Match
Agree on these with every captain, and put them in the WhatsApp group or on the fixture sheet:
- Points for a win, a tie, a no result and a forfeit.
- Whether a tie is settled by a Super Over, and whether the Super Over winner gets full win points.
- The tie-breaker order, for example wins, then head-to-head, then NRR, then a toss.
- How a match shortened before the start is counted. A sensible rule is that each side’s quota is the reduced overs, so a side all out in a 12-over match counts as 12 overs.
- Whether points and NRR carry forward to a second group stage. The T20 World Cup 2026 started its Super Eights from zero, with no points, wins or NRR carried forward (ICC, 18 February 2026).
- Who keeps the official table, and when it’s published after each match day.
Frequently Asked Questions
How many points is a win worth in a cricket points table?
It depends on the tournament, so announce it in advance. A simple local scale is 2 for a win, 1 for a tie or washout and 0 for a loss. The ICC’s ODI playing conditions use 4, 2 and 0, with a fifth point for a bonus-point win.
How do you calculate net run rate for a points table?
Add up all the runs a team has scored and divide by all the overs it faced. Do the same for runs conceded and overs bowled. Then subtract the second figure from the first. Convert overs to balls first, so 16.4 overs is 100 balls.
If a team is all out in 19.1 overs, what overs do you use for NRR?
The full quota, so 20 overs in a 20-over match. The ICC’s playing conditions apply this to the side that was all out; using 20 for the bowling side as well keeps both teams’ figures consistent. Entering 19.1 understates the bowling side’s NRR.
Does a washout count towards net run rate?
No. Under the ICC’s approach, only matches with a result count for NRR. Each team gets its points for the no result, but the runs and overs from that match are left out.
What is the best tie-breaker for a local cricket tournament?
There isn’t a single correct one. A common order is most wins, then the head-to-head result, then NRR, with a toss as the last resort. What matters most is announcing it before the first match.
Can a team with a lower NRR finish above a team with a higher NRR?
Yes, if the tie-breaker order puts wins or head-to-head before NRR. In the example in this guide, Eagles finish above Lions despite a lower NRR because they won the match between the two teams.
Related Criko Tools
- Net run rate calculator: add each team’s matches and it totals the balls for you, including overs like 16.4.
- Overs to balls converter: check any overs figure on the scoresheet before it goes into the table.
Related Cricket Guides
Conclusion
A fair points table comes down to three decisions made in advance: what each result is worth, the order of the tie-breakers, and the NRR rules (full overs for an all-out side, no NRR for a washout, overs counted as balls). Keep running totals after every match and the table will settle arguments instead of starting them.
