Cricket Powerplay Rules

Powerplay overs and field restrictions in T20, ODI and Test cricket, with the rules for shortened matches and how to work out a powerplay run rate.

Last updated: 3 October 2026

What is a powerplay in cricket?

A powerplay is a set of overs in a limited-overs innings when the fielding side may keep only a small number of fielders outside the 30-yard circle. With fewer fielders on the boundary, a ball hit over the infield is likely to go for four, so batters attack and the bowling side looks for early wickets.

Powerplays are part of One Day and T20 cricket. Test cricket does not have them. The overs are fixed by the playing conditions: neither captain chooses when a powerplay starts.

Powerplay rules at a glance

Powerplay overs and fielders allowed outside the circle, by format
FormatOversFielders allowed outside the circle
T20 (men’s T20Is, IPL)1 to 62
7 to 205
ODI (men’s)1 to 102
11 to 404
41 to 505
Women’s T20Is1 to 62
7 to 204
Women’s ODIs1 to 102
11 to 504
Test cricketNo powerplayNo limit

The wicketkeeper and the bowler are not counted: the limits apply to the other nine fielders. Domestic leagues can set their own playing conditions, so check the competition’s rules if a match looks different.

The 30-yard circle

The “circle” is really an oval painted or marked with discs on the outfield. It is made of two semicircles with a radius of 30 yards (27.43 metres), one centred on the middle stump at each end of the pitch, joined by straight lines. In women’s internationals the radius is 25.15 yards (23 metres).

What matters is where the fielders are standing at the moment the bowler releases the ball. A fielder can run out of the circle as soon as the ball has been bowled.

Powerplay rules in T20 cricket

A T20 innings has one powerplay: the first six overs, which is 36 legal balls. During those overs only two fielders may be outside the circle. From the seventh over to the end of the innings, up to five may be outside it.

The IPL uses the same six-over powerplay. In women’s T20 internationals the powerplay is also six overs, but only four fielders are allowed outside the circle afterwards.

Powerplay rules in ODI cricket

A men’s One Day International innings is split into three powerplays that together cover all 50 overs:

  • Powerplay 1, overs 1 to 10: two fielders outside the circle.
  • Powerplay 2, overs 11 to 40: four fielders outside the circle.
  • Powerplay 3, overs 41 to 50: five fielders outside the circle.

When commentators say “the powerplay” in an ODI, they usually mean the first ten overs. In women’s ODIs, two fielders are allowed outside the circle in the first ten overs and no more than four after that.

Is there a powerplay in Test cricket?

No. A Test captain can put fielders wherever they like, with one limit from the Laws of Cricket that applies to every format: no more than two fielders, apart from the wicketkeeper, may be behind square on the leg side when the ball is bowled. ODIs and T20s add a second limit: no more than five fielders on the leg side.

Powerplays in rain-shortened matches

When overs are lost before an innings starts, the powerplay shrinks with it. In men’s T20 internationals the powerplay stays at 30% of the innings, and since July 2025 it has been rounded to the nearest ball, not the nearest over. That means a powerplay can end in the middle of an over.

Powerplay length in a shortened men’s T20 international
Innings lengthPowerplayLegal balls
5 overs1.3 overs9
6 overs1.5 overs11
7 overs2.1 overs13
8 overs2.2 overs14
9 overs2.4 overs16
10 overs3 overs18
11 overs3.2 overs20
12 overs3.4 overs22
13 overs3.5 overs23
14 overs4.1 overs25
15 overs4.3 overs27
16 overs4.5 overs29
17 overs5.1 overs31
18 overs5.2 overs32
19 overs5.4 overs34
20 overs6 overs36

As everywhere in cricket, the figure after the point counts balls. A powerplay of 3.4 overs is 3 overs and 4 balls, or 22 legal balls. The overs to balls converter does that sum for any figure.

In a shortened ODI, the three powerplays are cut down in roughly the same proportions as a full innings: a fifth, three fifths and a fifth. A 40-over innings has powerplays of 8, 24 and 8 overs; a 30-over innings has 6, 18 and 6. The match officials confirm the exact overs before play resumes.

What happens if the field breaks the rule?

If too many fielders are outside the circle when the ball is bowled, the umpire calls a no-ball. The batting side gets one run, the ball has to be bowled again and, in ODIs and T20s, the next ball is a free hit.

The slow over-rate penalty

Field restrictions are also used to punish slow play. In T20 internationals and ODIs, if the fielding side has not started its final over by the time the innings was due to end, it must bring one extra fielder inside the circle for the overs that remain: four outside, not five.

Working out a powerplay run rate

A powerplay score is usually judged by its run rate: the runs scored per over while the field was up. The sum is the same as for any innings, as long as you count legal balls.

A full T20 powerplay

A side is 54 for 1 after six overs. That is 54 ÷ 6 = 9.00 runs per over.

The first ten overs of an ODI

62 without loss after ten overs is 62 ÷ 10 = 6.20 runs per over.

A shortened powerplay

In a 12-over match the powerplay is 3.4 overs, or 22 balls. A side that makes 31 in it has scored at 31 ÷ (22 ÷ 6) = 8.45 runs per over, not 31 ÷ 3.4 = 9.12.

The run rate calculator handles part overs for you. In a chase, the required run rate calculator shows what is needed once the powerplay is over.

How the powerplay rules have changed

  • 1992: fielding restrictions become standard in ODIs: two fielders outside the circle for the first 15 overs.
  • 2005: the ICC introduces the name “powerplay”. The restrictions cover 20 overs: the first ten, plus two blocks of five chosen by the fielding captain.
  • 2008: the batting side gets to choose when one of the five-over blocks is taken.
  • 2012: the bowling powerplay is dropped, and only four fielders are allowed outside the circle in the other overs.
  • 2015: the batting powerplay is dropped. The three fixed powerplays used today begin, with five fielders allowed out in the last ten overs.
  • 2025: powerplays in shortened men’s T20 internationals are rounded to the nearest ball.

Common questions

How many overs is the powerplay in T20 cricket?

Six overs: the first 36 legal balls of the innings.

How many overs is the powerplay in an ODI?

The first powerplay is ten overs. All 50 overs belong to one of three powerplays, but the first ten are the ones with only two fielders outside the circle.

How many fielders can be outside the circle in a powerplay?

Two, in the first six overs of a T20 and the first ten overs of an ODI.

Do wides and no-balls count towards the powerplay?

No. A powerplay is measured in legal balls, so a wide or a no-ball does not use one up. The runs from it still count in the powerplay score.

Can a captain choose when to take the powerplay?

Not any more. Since 2015 every powerplay in international cricket has been fixed to set overs.