Scoring & Stats

How to Score a Cricket Match: A Scorer’s Guide

9 min read

How to Score a Cricket Match: A Scorer’s Guide

Someone has handed you the scorebook and the first ball is five minutes away. This guide shows you how to score a cricket match properly: what to record for every delivery, where wides, no-balls, byes and leg byes go, which wickets count for the bowler, and the two checks that tell you the book is right. A full over and a full innings are worked through so you can see each rule in use.

Quick Answer

To score a cricket match, record every delivery in three places: the batter’s runs, the bowler’s over, and the team total. Runs off the bat go to the batter and the bowler. Wides and no-balls are extras charged to the bowler, while byes and leg byes are extras that are not. At the end of each innings, the batters’ runs plus extras must equal the total, and so must the bowlers’ runs plus byes, leg byes and penalty runs.

What a Scoresheet Records

Paper scorebooks and scoring apps differ in layout, but they keep the same five things:

Section What you write
Batting Each batter’s runs ball by ball, how they were out, the bowler, and their total
Bowling Each bowler’s overs, ball by ball, with runs, wides, no-balls and wickets marked
Running total The team score after every scoring delivery, usually ticked off on a strip of numbers
Extras Separate boxes for byes, leg byes, wides, no-balls and penalty runs
Fall of wickets The team score when each wicket fell, and which batter went

The ICC’s playing conditions expect two scorers to record runs, wickets and overs, and to check their records against each other often (Clause 3.1 and 3.2). In local cricket there’s often only one scorer, sometimes a player waiting to bat. If you can, ask a teammate to keep a simple over-by-over tally of the total. That gives you something to compare against. If you’re scoring on your own, the free Criko scoring app for Android records each ball and adds up the batting, bowling and extras for you.

Where Every Run Goes

This is the part most new scorers get wrong. Each type of run is recorded in a particular place, and some count as a ball in the over while others don’t. The table below follows the ICC’s men’s ODI playing conditions (Clauses 18, 21, 22 and 23). Clause 18.10.3 sums up the bowler’s side: the bowler is charged with runs off the bat, no-balls and wides, and nothing else.

What happened Batter’s runs Extras box Charged to bowler Counts in the over
Runs off the bat All of them None Yes Yes
Bye (ball misses bat and body) None Byes No Yes
Leg bye (ball hits the body) None Leg byes No Yes
Wide, plus any runs or boundary None All as wides Yes, all No
No-ball, ball hit for runs The runs off the bat 1 no-ball Yes, all No
No-ball, not hit, batters run None 1 no-ball, plus byes or leg byes The 1 no-ball only No
Penalty runs (5) None Penalty No Not a delivery

Three details are worth reading twice:

  • A wide is all wides. If a wide beats the keeper and goes to the boundary, that’s 5 wides, and the bowler is charged all 5 (ICC Clause 22.7).
  • A no-ball hit for four is 5 runs. The batter gets 4, the extras get 1 no-ball, and the bowler is charged 5 (Clause 21.15 and 21.16).
  • Byes off a no-ball split. The one-run penalty goes in the no-ball box and is charged to the bowler. The runs the batters complete go in the byes or leg-byes box (Clause 21.16 and 23.1).

There’s also a scoring convention that isn’t in the playing conditions: a no-ball counts as a ball faced by the striker, but a wide doesn’t. Most scorebooks and apps, and Criko’s strike rate calculator, work this way.

Which Wickets the Bowler Gets

The bowler is credited with a wicket when the batter is bowled, caught, LBW, stumped or out hit wicket. The bowler doesn’t get the wicket for a run out (ICC Clause 38.5), obstructing the field, hitting the ball twice or timed out.

For a run out, write “run out” and the fielder’s name if you saw it, but leave the bowler’s wicket column alone. Runs the batters completed before the run out still count. The run they were attempting doesn’t (Clause 38.4).

Off a no-ball, a batter can only be out run out, obstructing the field or hit the ball twice (Clause 21.18). Off a wide, they can also be out stumped or hit wicket (Clause 22.9). If a scorebook shows “bowled” off a no-ball, something has gone wrong.

Step-by-Step: Scoring One Over

Here’s a hypothetical over in a club T20 match. Eight deliveries are bowled, but only six of them count.

Delivery What happened Batter Extras Bowler Legal ball?
1 Defended 0 – 0 1st
2 Driven for four 4 – 4 2nd
3 Wide down the leg side – 1 wd 1 No
4 Pushed for a single 1 – 1 3rd
5 No-ball, hit for two 2 1 nb 3 No
6 Off the pad, two leg byes – 2 lb 0 4th
7 Bowled 0, out – 0, wicket 5th
8 New batter takes a single 1 – 1 6th

Now add it up.

  1. Over total: 0 + 4 + 1 + 1 + 3 + 2 + 0 + 1 = 12 runs.
  2. Batters’ runs: 4 + 1 + 2 + 1 = 8.
  3. Extras: 1 wide + 1 no-ball + 2 leg byes = 4. Check: 8 + 4 = 12.
  4. Bowler: 4 + 1 + 1 + 3 + 1 = 10 runs, 1 wicket. The 2 leg byes aren’t the bowler’s. Check: 10 + 2 = 12.

The bowler’s figures for this over are written 1-0-10-1: overs, maidens, runs, wickets. On the batting side, the batter who was bowled is credited with a ball faced for the no-ball (delivery 5) but not for the wide.

Checking the Book at the End of an Innings

Every run on the sheet is counted twice: once on the batting side and once on the bowling side. That gives you two checks that must both come out exactly right.

Check 1: Batters’ runs + all extras = team total

Check 2: Bowlers’ runs + byes + leg byes + penalty runs = team total

Take a hypothetical chase that ends at 151/6 in 18.4 overs. The extras were 2 byes, 3 leg byes, 6 wides and 2 no-balls, so 13 in all.

Check Working Result
1 Batters’ runs 138 + extras 13 151
2 Bowlers’ runs (31 + 34 + 27 + 29 + 25 = 146) + byes 2 + leg byes 3 151
Overs 4 + 4 + 4 overs (72 balls) + 3.2 + 3.2 overs (20 + 20 balls) 112 balls = 18.4 overs
Wickets 5 to bowlers + 1 run out 6

Notice what Check 2 doesn’t include: the 6 wides and 2 no-balls are already inside the bowlers’ 146. If you add them again, you’ll be 8 runs over. If a check is out by exactly the wides plus no-balls, or by one boundary, you’ve found the cause.

Add the overs in balls, not as decimals. Here, 3.2 + 3.2 is 20 + 20 = 40 balls, which is 6.4 overs, so the shortcut happens to work. It often doesn’t: two spells of 2.5 and 2.4 overs would add up to 4.9 by ordinary addition, which isn’t a real number of overs. In balls it’s 17 + 16 = 33 balls, or 5.3 overs.

Once the book balances, the statistics follow:

  • Team run rate: 151 runs in 18.4 overs, which is 112 balls or 18.67 decimal overs, gives 8.09 runs per over.
  • A bowler’s economy: 29 runs off 3.2 overs (20 balls) is 8.70 runs per over.
  • A batter’s strike rate: 46 runs off 31 balls faced is 148.39. Those 31 balls include one no-ball faced, but not the wide bowled to the same batter.

Umpire Signals a Scorer Must Know

The umpire signals to the scorers when the ball is dead and waits until a scorer has acknowledged each signal before play goes on (ICC Clause 2.13.2). Clause 3.3 requires scorers to acknowledge every signal straight away. A raised hand works in most local grounds.

Signal What the umpire does
Four Waves an arm from side to side, ending across the chest
Six Raises both arms above the head
Bye Raises an open hand above the head
Leg bye Touches a raised knee
Wide Holds both arms out horizontally
No-ball Holds one arm out horizontally
Short run Bends an arm and touches the nearer shoulder with the fingertips
Revoke last signal Touches each shoulder with the opposite hand

A short run signal means one of the runs the batters ran isn’t scored (ICC Clause 18.4.1). Take it off wherever you had put it: the batter’s runs and the bowler’s if the ball was hit, or the byes or leg byes if it wasn’t.

Important Points

  • Agree the score every over. If there are two of you, compare totals at the end of each over, not at the end of the innings. A one-run gap is easy to trace back one over, but not back 18 overs.
  • Check with the umpires on doubtful points. The ICC’s playing conditions call consultation between umpires and scorers essential (Clause 2.15). At a break, check the score, wickets and overs with them.
  • Leg byes are never the batter’s runs, even when the ball runs away for four off the pad.
  • Local rules vary. Some tennis-ball and box-cricket leagues change the penalty for a wide or a no-ball. Score whatever your league has agreed, and write the rule on the front of the scoresheet before play begins.

Frequently Asked Questions

Does a wide count as a ball faced by the batter?

No. By standard scoring convention, a wide isn’t a ball faced, and it isn’t one of the six balls in the over either. A no-ball, on the other hand, does count as a ball faced by the striker, even though it doesn’t count in the over.

Are byes and leg byes charged to the bowler?

No. Byes and leg byes go in the extras box and are credited to the batting side, but they don’t count against the bowler’s figures. Wides and no-balls do count against the bowler.

How do you score a no-ball that is hit for four?

Write 4 runs to the batter and 1 no-ball in the extras box, so 5 runs go on the total. All 5 are charged to the bowler, and the delivery doesn’t count as one of the six balls in the over.

What do bowling figures like 4-0-28-2 mean?

They’re overs, maidens, runs conceded and wickets, in that order. So 4-0-28-2 means 4 overs, no maidens, 28 runs and 2 wickets. Part-overs are written in overs notation, such as 3.2 for three overs and two balls.

Does the bowler get credit for a run out?

No. A run out goes in the batter’s “how out” column, but it isn’t added to the bowler’s wickets. The bowler is credited only for bowled, caught, LBW, stumped and hit wicket.

How do I check that my scoresheet is correct?

Do two checks. Add the batters’ runs and all the extras, and then add the bowlers’ runs plus byes, leg byes and penalty runs. Both must equal the team total. Also check that the bowlers’ overs add up, in balls, to the innings total.


Related Criko Tools

Related Cricket Guides

Conclusion

Good scoring comes down to putting every run in exactly one place: the bat, the extras box, or both the extras box and the bowler’s column. Do that for every delivery, agree the total every over, and finish each innings with the two checks. When both give the same total as the scoreboard, your book is right.